• Yuletide Red

A rich red transparent dead matt.

Velvet colours have a dead matt sheen, and a soft velvety feel. They may show some burnishing through rubbing, so test this before use.

This product is a coloured transparent ‘Candy’ effect. The final appearance will depend on

  • the colour of the substrate: Ultrachrome 4617 or Sovereign Silver 2015 are the most popular base colours depending on the desired effect;
  • the dry film thickness that the Candy is applied: higher film thicknesses yield a more intense colour. Careful control of application thickness allows fine tuning of the final colour.

We recommend spraying a test piece first to ensure the anticipated colour is achieved.

To achieve the colour shown, apply over Ultrachrome 4617.


At a Glance:

  • Polyester-Acrylic
  • Curing schedule: 10 minutes @ 200C metal temperature
  • Sheen: Dead Matt <10 GU
  • Recommended dry film thickness: 70-90 microns
  • Does NOT require a clear coat for exterior use
  • Colour durability (direct sunlight): Good

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Yuletide Red

  • Product Code: 4731
  • Availability: In Stock
  • £27.74

  • Inc VAT: £33.29

  • 1-19 Kgs
    £27.74
  • 20-99 Kgs
    £18.49
  • 100+ Kgs
    £16.95




Yuletide Red



  • £33.29

  • Ex Tax: £27.74
    • Product Code: 4731
    • Availability: In Stock
Discounts:
  • 1-19 Kgs
    £27.74
  • 20-99 Kgs
    £18.49
  • 100+ Kgs
    £16.95


Qty



A rich red transparent dead matt.

Velvet colours have a dead matt sheen, and a soft velvety feel. They may show some burnishing through rubbing, so test this before use.

This product is a coloured transparent ‘Candy’ effect. The final appearance will depend on

  • the colour of the substrate: Ultrachrome 4617 or Sovereign Silver 2015 are the most popular base colours depending on the desired effect;
  • the dry film thickness that the Candy is applied: higher film thicknesses yield a more intense colour. Careful control of application thickness allows fine tuning of the final colour.

We recommend spraying a test piece first to ensure the anticipated colour is achieved.

To achieve the colour shown, apply over Ultrachrome 4617.


At a Glance:

  • Polyester-Acrylic
  • Curing schedule: 10 minutes @ 200C metal temperature
  • Sheen: Dead Matt <10 GU
  • Recommended dry film thickness: 70-90 microns
  • Does NOT require a clear coat for exterior use
  • Colour durability (direct sunlight): Good


Write a review

Note: HTML is not translated!
    Bad           Good
Captcha